FLYPOWER has a full line of heat shrink products that meet the North American MIL/23053 and European VG family of specifications. The table below lists FLYPOWER heat shrink products and the Military cross reference.

Military Specification  SAE-AMS-DTL 23053	FLYPOWER Model	Product Family	Application
/5 Class 1 & 3	BH-2F BH-2F(3X) BH-2F(4X)	Thin wall tubing – flexible	Insulation
/6	BH-2R	Thin wall tubing – semi-rigid	Strain relief
/4 Class 3	BH-5(3X)(4X)-F	Dual wall tubing	Sealing Strain relief
N/A	BH-5(2000)	Dual wall tubing	Protection of metal pipes and fuel lines against environment damages
/18	BH-150K	high temperature tubing	High temperature – up to 150°C
/8	BH-175K	high temperature tubing	High temperature – up to 175°C
/13	BH-200E	high temperature tubing	High temperature – up to 200°C
/12	BH-TFE	high temperature tubing	High temperature – up to 260°C
/15	FH-FRA2 FH-FRA3 BH-RA(6X)	Media & heavy wall tubing	Strain relief Connector sealing
/16	BH-DR	high temperature tubing	Diesel resistance

 

Insulate, seal, connection and protect are the key requirements in high volume or specialized electronic applications. From the common use of thin wall polyolefin on small gauge wire assemblies to the use of high temperature PVDF (polyvinylidene fluoride) heat shrink on heating sensors FLYPOWER has the product.

Category	Material	Application	Options
Thin Wall Tubing	Polyolefin	Insulation Strain relief Bundling Mechanical protection	Shrink ratios Flammability rating Colours
Dual Wall Tubing	Polyolefin Patented Ionic Polymer	Splice sealing Terminal sealing Connectors	Shrink ratios Adhesive properties Colours
High Temperature Tubing	PVC PVDF Viton? Elastomers Teflon? Neoprene	Strain relief Insulation Bundling	Fluid resistance Operating temperatures Flammability rating Colours

 

FLYPOWER heat shrink products are approved to RoHS and Military specifications and we are ready to work with you to qualify or design heat shrink products to match your unique requirements.

 

FLYPOWER offers a full range of high quality heat shrink products for the Electrical and Utility industries including cable accessories for low voltage and medium voltage applications. FLYPOWER’s broad line of electrical insulation products are designed and tested to meet the most demanding requirements of IEEE, UL, CSA, ANSI as well as many other international standards for performance and long term reliability.

For application support tables please click on the following main categories:

?  Low Voltage – Medium/Heavy Wall Heat Shrink Tubing 
?  Medium Voltage Tubing & Tape 
?  Mould Products 
?  Power Cable Accessories

Low Voltage – Medium/Heavy Wall Heat Shrink Tubing

FLYPOWER’s field proven medium and heavy wall heat shrink products, such as BH-RA2, BH-R2, BH-RA3, BH-FRA, BH-RA6X, BH-STV,BH-RSL and BH-RS, are world class leaders when it comes to split resistance, adhesive performance and total value. Whether it’s for splice sealing, jacket repair, mechanical protection, electrical insulation or strain relief applications, you can count on FLYPOWER products to meet the most challenging requirements.

The newest addition to this product family is the BH-RSL which provides the following exceptional benefits in the repair and retrofit protection of aging cable infrastructures without disconnection of service:

? Reduces total installed costs by 80%

? Eliminates system downtime during installation

? Provides moisture proof seal with a fully encapsulating hot melt adhesive

 ? Offers quick and easy application using an innovative closure mechanism

             

Medium Voltage Tubing & Tape

For the construction of medium voltage splices and terminations it is critical to use trustworthy materials and processes that are craft friendly, time proven and exceptionally reliable.FLYPOWER’s cable accessory products are designed using heat shrink technology which has proven to work in all applications and often the only choice of many of the most demanding users wishing to install rapidly or minimize outages while maintaining superior performance. 

FLYPOWER offers a comprehensive range of medium voltage cable accessories for the Electrical, Utility and Industrial markets. The BH-SCT and BH-SC100 series of cable termination and joint kits are factory designed for 5 – 35 kV rated URD or shielded extruded dielectric power cables and include joints and accessories for PILC type network cables. The kitted accessories are offered for single and three conductor, unarmoured and armoured cable configurations. FLYPOWER’s innovative heat shrink products provide a cost effective alternative to hand applied, rubber molded and resin based technology.

Mould Products

Specialty tubing and kit accessories are used for demanding applications where electrical performance and ease of installation are critical, e.g. in electrical switchgear and power distribution equipment:

? Anti-track tubing and tape for insulating medium voltage bus bars

? Motor lead termination kits to insulate and protect bolted connections

? Elbow sealing kits for sealing and reinforcing elbows on medium voltage cables

FLYPOWER is the leading manufacturer of outside plant protection products for broad band communications. Our innovative products prevent water ingress and mechanical damage to cables, splices and connectors. The main areas of application of heat shrink products in the outside plant can be divided into Hard Line Coax, Drop, Fibre Systems and Wireless Infrastructure.

Product	Description	Application	Shrink Ratio	Operating Temperature °C
BH-FSP	Fiber optic splice protector	Fusion splice protection	3:1	-40 to 60
BH-STV	Cable sleeves with adhesive	Sealing hard line connectors	3:1	-55 to 110
BH-RSW	Wraparound sleeve	Retrofit protection and cable repair	> 3:1	-55 to 110
BH-FOCT	Fiber optic closure termianal heat shrink tubing	provide excellent watertight and prevent leaking from terminal box	> 3:1	-55 to 110

 

Hard Line Coax BH-STV heat shrink is the preferred choice of tech ops and construction teams for protecting coaxial connectors. The BH-STV system ensures the benefits of error free installation and long life protection through the following key features: Split resistance Synchronized sleeve recovery and adhesive flow Thermocromatic lines that change colour when seal is achieved Good adhesive flow Strong adhesive bond unaffected by extreme temperature cycling Strippable adhesive for re-entry Additional products include BH-RSL and BH-Tape 55/65/75 tape, two products that can be used for retrofit protection or sealing in tight locations.
Fibre Systems BH-FSP fibre optic splice protectors are compliant with Bellcore GR-1380 and are a daily consumable for fibre splicers in cable and telecom systems. Additional products include FLYPOWER medium and heavy wall heat shrink tubing and wrap around products.
BH-FOCT Fiber optic closure heat shrink tubing is made of medium wall heat shrinkable tube, The internal surface is with a layer of spiral or strength coated holt melt adhesive. Out layer provide reliable protection. High quality hot melt adhesive provide excellent watertight and prevent leaking from terminal box. Mainly use for fiber optic closure (terminal box)

 

FLYPOWER has a full line of heat shrink products that meet the North American MIL/23053 and European VG family of specifications. The table below lists FLYPOWER heat shrink products and the Military cross reference.

Military Specification  SAE-AMS-DTL 23053	FLYPOWER Model	Product Family	Application
/5 Class 1 & 3	BH-2F BH-2F(3X) BH-2F(4X)	Thin wall tubing – flexible	Insulation
/6	BH-2R	Thin wall tubing – semi-rigid	Strain relief
/4 Class 3	BH-5(3X)(4X)-F	Dual wall tubing	Sealing Strain relief
N/A	BH-5(2000)	Dual wall tubing	Protection of metal pipes and fuel lines against environment damages
/18	BH-150K	high temperature tubing	High temperature – up to 150°C
/8	BH-175K	high temperature tubing	High temperature – up to 175°C
/13	BH-200E	high temperature tubing	High temperature – up to 200°C
/12	BH-TFE	high temperature tubing	High temperature – up to 260°C
/15	FH-FRA2 FH-FRA3 BH-RA(6X)	Media & heavy wall tubing	Strain relief Connector sealing
/16	BH-DR	high temperature tubing	Diesel resistance