Medical Grade Tubing

Medical grade peelable heat shrink tubing BH-2(PMT)

info@flypower-heatshrink.com (Super User) — Sat, 23 Apr 2022 08:56:06 +0800

Peelable heat shrink tubing BH-2(PMT)

{tab=Specification}

Model	Size (mm)	As Supplied (mm)	After Full Recovered(mm)
Model	Size (mm)	As Supplied (mm)	ID (D)	Wall Thickness(T)
BH-2(PMT)-0.6	0.60	0.71±0.10	0.28	0.25±0.05
BH-2(PMT)-0.8	0.80	1.02±0.13	0.36	0.28±0.05
BH-2(PMT)-1.2	1.20	1.40±0.13	0.51	0.41±0.08
BH-2(PMT)-1.6	1.60	1.83±0.13	0.71	0.51±0.08
BH-2(PMT)-2.4	2.40	2.72±0.20	1.04	0.51±0.08
BH-2(PMT)-3.2	3.20	3.56±0.25	1.45	0.51±0.08
BH-2(PMT)-4.8	4.80	5.21±0.25	2.21	0.51±0.08
BH-2(PMT)-6.4	6.40	6.99±0.38	3.00	0.64±0.08
BH-2(PMT)-9.5	9.50	10.54±0.51	4.30	0.64±0.08

Customized dimensions and heat shrink ratio for your special applications on request.

Cross Reference
Tyco-Raychem: MT-LWA

Applications:

{tab=Technial Data}

Property	Test Method	Typical Data
Longitudinal change	ASTM D 2671	-10%~10%
Concentricity as supplied	ASTM D 2671	≥ 70%
Tensile strength	ASTM D 2671,20"/minute	≥ 1500 Mpa
Elongation at break	ASTM D 2671,20"/minute	200% minimum
Secant modulus (expanded)	ASTM D 2671	≤ 2.5 x104 Mpa
Elongation at break after aging	ASTM D 2671(175?C/168 hrs)	≥ 100%
Electrical dielectric strength	ASTM D 2671	≥ 500 volts/mm
Dielectric withstand	ASTM D 2671(AC3000V/60Hz)	60 Seconds no breakdown
Heavy metals analysis (Cadmium,Mercury,Lead,Bismuth,Antimony)	USP XXII Physiochemical tests-plastic	≤ 1 ppm(total of all metals)

{/tabs}

Medical grade peelable heat shrink tubing BH-2(PMT)-LS

info@flypower-heatshrink.com (Super User) — Thu, 11 Aug 2022 14:18:03 +0800

Peelable heat shrink tubing BH-2(PMT)-LS which could be peeled off without additional heat

{tab=Specification}

Model	Size (mm)	As Supplied (mm)	After Full Recovered(mm)
Model	Size (mm)	As Supplied (mm)	Max. ID (D)	Wall Thickness(T)
BH-2(PMT)-LS-0.6	0.60	0.71±0.10	0.28	0.25±0.05
BH-2(PMT)-LS-0.8	0.80	1.02±0.13	0.36	0.28±0.05
BH-2(PMT)-LS-1.2	1.20	1.40±0.13	0.51	0.41±0.08
BH-2(PMT)-LS-1.6	1.60	1.83±0.13	0.71	0.51±0.08
BH-2(PMT)-LS-2.4	2.40	2.72±0.20	1.04	0.51±0.08
BH-2(PMT)-LS-3.2	3.20	3.56±0.25	1.45	0.51±0.08
BH-2(PMT)-LS-4.8	4.80	5.21±0.25	2.21	0.51±0.08
BH-2(PMT)-LS-6.4	6.40	6.99±0.38	3.00	0.64±0.08
BH-2(PMT)-LS-9.5	9.50	10.54±0.51	4.30	0.64±0.08

Customized dimensions and heat shrink ratio for your special applications on request.

Cross Reference
Tyco-Raychem: MT-LWA

Applications:

{tab=Technial Data}

Property	Test Method	Typical Data
Longitudinal change	ASTM D 2671	-10%~10%
Concentricity as supplied	ASTM D 2671	≥ 70%
Tensile strength	ASTM D 2671,20"/minute	≥ 1500 Mpa
Elongation at break	ASTM D 2671,20"/minute	200% minimum
Secant modulus (expanded)	ASTM D 2671	≤ 2.5 x104 Mpa
Elongation at break after aging	ASTM D 2671(175?C/168 hrs)	≥ 100%
Electrical dielectric strength	ASTM D 2671	≥ 500 volts/mm
Dielectric withstand	ASTM D 2671(AC3000V/60Hz)	60 Seconds no breakdown
Heavy metals analysis (Cadmium,Mercury,Lead,Bismuth,Antimony)	USP XXII Physiochemical tests-plastic	≤ 1 ppm(total of all metals)

{/tabs}

Medical grade ultra thin wall PET (Polyester) heat shrink tubing-Round type BH-MT-PET-CB

info@flypower-heatshrink.com (Super User) — Wed, 28 Jun 2023 09:07:43 +0800

Medical grade ultra thin wall PET (Polyester) heat shrink tubing-Round type BH-MT-PET-CB

{tab=Specification}

Model Number	Unit	Expanded ID	Expanded WT					Recovered ID	Recovered WT					Standard Length
Model Number	Unit	Expanded ID	XS	S	M	L	XL	Recovered ID	XS	S	M	L	XL	Standard Length
1.3:1 Shrink ratio
MT-PET-CB-1.3X-□-0.30	Inch	0.012±0.001	0.0003±0.0001	0.0005±0.0001	-	-	-	0.01	0.0004	0.0006	-	-	-	50
MT-PET-CB-1.3X-□-0.30	mm	0.30±0.03	0.008±0.003	0.0127±0.003	-	-	-	0.23	0.0104	0.0165	-	-	-	1270
MT-PET-CB-1.3X-□-0.41	Inch	0.016±0.001	0.0003±0.0001	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.013	0.0004	0.0006	0.001	0.0013	-	50
MT-PET-CB-1.3X-□-0.41	mm	0.41±0.03	0.008±0.003	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.32	0.0104	0.0165	0.0247	0.033	-	1270
MT-PET-CB-1.3X-□-0.53	Inch	0.021±0.001	0.0003±0.0001	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.016	0.0004	0.0006	0.001	0.0013	-	50
MT-PET-CB-1.3X-□-0.53	mm	0.53±0.03	0.008±0.003	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.41	0.0104	0.0165	0.0247	0.033	-	1270
MT-PET-CB-1.3X-□-0.69	Inch	0.027±0.002	0.0003±0.0001	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.021	0.0004	0.0006	0.001	0.0013	-	50
MT-PET-CB-1.3X-□-0.69	mm	0.69±0.05	0.008±0.003	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.53	0.0104	0.0165	0.0247	0.033	-	1270
MT-PET-CB-1.3X-□-0.89	Inch	0.035±0.002	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.027	-	0.0006	0.001	0.0013	-	50
MT-PET-CB-1.3X-□-0.89	mm	0.89±0.05	-	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.69	-	0.0165	0.0247	0.033	-	1270
MT-PET-CB-1.3X-□-1.17	Inch	0.046±0.002	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.035	-	0.0006	0.001	0.0013	-	50
MT-PET-CB-1.3X-□-1.17	mm	1.17±0.05	-	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.9	-	0.0165	0.0247	0.033	-	1270
MT-PET-CB-1.3X-□-1.50	Inch	0.059±0.004	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	0.0020±0.0004	0.045	-	0.0006	0.001	0.0013	0.0026	50
MT-PET-CB-1.3X-□-1.50	mm	1.50±0.10	-	0.0127±0.003	0.019±0.004	0.0254±0.005	0.051±0.01	1.15	-	0.0165	0.0247	0.033	0.0663	1270
MT-PET-CB-1.3X-□-1.96	Inch	0.077±0.004	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	0.0020±0.0004	0.059	-	0.0006	0.001	0.0013	0.0026	50
MT-PET-CB-1.3X-□-1.96	mm	1.96±0.10	-	0.0127±0.003	0.019±0.004	0.0254±0.005	0.051±0.01	1.51	-	0.0165	0.0247	0.033	0.0663	1270
MT-PET-CB-1.3X-□-2.54	Inch	0.100±0.004	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	0.0020±0.0004	0.077	-	0.0006	0.001	0.0013	0.0026	50
MT-PET-CB-1.3X-□-2.54	mm	2.54±0.10	-	0.0127±0.003	0.019±0.004	0.0254±0.005	0.051±0.01	1.95	-	0.0165	0.0247	0.033	0.0663	1270
MT-PET-CB-1.3X-□-3.33	Inch	0.131±0.008	-	0.0006±0.0001	0.0007±0.0002	0.0010±0.0002	0.0020±0.0004	0.101	-	0.0008	0.001	0.0013	0.0026	50
MT-PET-CB-1.3X-□-3.33	mm	3.33±0.20	-	0.0152±0.003	0.019±0.004	0.0254±0.005	0.051±0.01	2.56	-	0.0198	0.0247	0.033	0.0663	1270
MT-PET-CB-1.3X-□-4.32	Inch	0.170±0.008	-	0.0007±0.0001	0.0010±0.0002	0.0014±0.0002	0.0020±0.0004	0.131	-	0.0009	0.0013	0.0018	0.0026	50
MT-PET-CB-1.3X-□-4.32	mm	4.32±0.20	-	0.0178±0.003	0.026±0.004	0.0360±0.005	0.051±0.01	3.32	-	0.0231	0.0338	0.0468	0.0663	1270
MT-PET-CB-1.3X-□-5.61	Inch	0.221±0.011	-	0.0008±0.0001	0.0012±0.0002	0.0017±0.0002	0.0020±0.0004	0.17	-	0.001	0.0015	0.0021	0.0026	50
MT-PET-CB-1.3X-□-5.61	mm	5.61±0.28	-	0.0203±0.003	0.030±0.004	0.0420±0.005	0.051±0.01	4.32	-	0.0264	0.039	0.0546	0.0663	1270
MT-PET-CB-1.3X-□-7.29	Inch	0.287±0.015	-	0.0009±0.0001	0.0013±0.0002	0.0019±0.0002	0.0020±0.0004	0.221	-	0.0012	0.0017	0.0024	0.0026	50
MT-PET-CB-1.3X-□-7.29	mm	7.29±0.38	-	0.0229±0.003	0.034±0.004	0.0470±0.005	0.051±0.01	5.61	-	0.0298	0.0442	0.0611	0.0663	1270
1.6:1 Shrink ratio
MT-PET-CB-1.6X-□-0.30	Inch	0.012±0.001	0.0003±0.0001	0.0005±0.0001	-	-	-	0.007	0.0005	0.0008	-	-	-	50
MT-PET-CB-1.6X-□-0.30	mm	0.30±0.03	0.008±0.003	0.0127±0.003	-	-	-	0.19	0.0128	0.0203	-	-	-	1270
MT-PET-CB-1.6X-□-0.41	Inch	0.016±0.001	0.0003±0.0001	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.01	0.0005	0.0008	0.0012	0.0016	-	50
MT-PET-CB-1.6X-□-0.41	mm	0.41±0.03	0.008±0.003	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.26	0.0128	0.0203	0.0304	0.0406	-	1270
MT-PET-CB-1.6X-□-0.53	Inch	0.021±0.001	0.0003±0.0001	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.013	0.0005	0.0008	0.0012	0.0016	-	50
MT-PET-CB-1.6X-□-0.53	mm	0.53±0.03	0.008±0.003	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.33	0.0128	0.0203	0.0304	0.0406	-	1270
MT-PET-CB-1.6X-□-0.69	Inch	0.027±0.002	0.0003±0.0001	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.017	0.0005	0.0008	0.0012	0.0016	-	50
MT-PET-CB-1.6X-□-0.69	mm	0.69±0.05	0.008±0.003	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.43	0.0128	0.0203	0.0304	0.0406	-	1270
MT-PET-CB-1.6X-□-0.89	Inch	0.035±0.002	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.022	-	0.0008	0.0012	0.0016	-	50
MT-PET-CB-1.6X-□-0.89	mm	0.89±0.05	-	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.56	-	0.0203	0.0304	0.0406	-	1270
MT-PET-CB-1.6X-□-1.17	Inch	0.046±0.002	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	-	0.029	-	0.0008	0.0012	0.0016	-	50
MT-PET-CB-1.6X-□-1.17	mm	1.17±0.05	-	0.0127±0.003	0.019±0.004	0.0254±0.005	-	0.73	-	0.0203	0.0304	0.0406	-	1270
MT-PET-CB-1.6X-□-1.50	Inch	0.059±0.004	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	0.0020±0.0004	0.037	-	0.0008	0.0012	0.0016	0.0032	50
MT-PET-CB-1.6X-□-1.50	mm	1.50±0.10	-	0.0127±0.003	0.019±0.004	0.0254±0.005	0.051±0.01	0.94	-	0.0203	0.0304	0.0406	0.0816	1270
MT-PET-CB-1.6X-□-1.96	Inch	0.077±0.004	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	0.0020±0.0004	0.048	-	0.0008	0.0012	0.0016	0.0032	50
MT-PET-CB-1.6X-□-1.96	mm	1.96±0.10	-	0.0127±0.003	0.019±0.004	0.0254±0.005	0.051±0.01	1.23	-	0.0203	0.0304	0.0406	0.0816	1270
MT-PET-CB-1.6X-□-2.54	Inch	0.100±0.004	-	0.0005±0.0001	0.0007±0.0002	0.0010±0.0002	0.0020±0.0004	0.063	-	0.0008	0.0012	0.0016	0.0032	50
MT-PET-CB-1.6X-□-2.54	mm	2.54±0.10	-	0.0127±0.003	0.019±0.004	0.0254±0.005	0.051±0.01	1.59	-	0.0203	0.0304	0.0406	0.0816	1270
MT-PET-CB-1.6X-□-3.33	Inch	0.131±0.008	-	0.0006±0.0001	0.0007±0.0002	0.0010±0.0002	0.0020±0.0004	0.082	-	0.001	0.0012	0.0016	0.0032	50
MT-PET-CB-1.6X-□-3.33	mm	3.33±0.20	-	0.0152±0.003	0.019±0.004	0.0254±0.005	0.051±0.01	2.08	-	0.0243	0.0304	0.0406	0.0816	1270
MT-PET-CB-1.6X-□-4.32	Inch	0.170±0.008	-	0.0007±0.0001	0.0010±0.0002	0.0014±0.0002	0.0020±0.0004	0.106	-	0.0011	0.0016	0.0023	0.0032	50
MT-PET-CB-1.6X-□-4.32	mm	4.32±0.20	-	0.0178±0.003	0.026±0.004	0.0360±0.005	0.051±0.01	2.7	-	0.0285	0.0416	0.0576	0.0816	1270
MT-PET-CB-1.6X-□-5.61	Inch	0.221±0.011	-	0.0008±0.0001	0.0012±0.0002	0.0017±0.0002	0.0020±0.0004	0.138	-	0.0013	0.0019	0.0026	0.0032	50
MT-PET-CB-1.6X-□-5.61	mm	5.61±0.28	-	0.0203±0.003	0.030±0.004	0.0420±0.005	0.051±0.01	3.51	-	0.0325	0.048	0.0672	0.0816	1270
MT-PET-CB-1.6X-□-7.29	Inch	0.287±0.015	-	0.0009±0.0001	0.0013±0.0002	0.0019±0.0002	0.0020±0.0004	0.18	-	0.0014	0.0021	0.003	0.0032	50
MT-PET-CB-1.6X-□-7.29	mm	7.29±0.38	-	0.0229±0.003	0.034±0.004	0.0470±0.005	0.051±0.01	4.56	-	0.0366	0.0544	0.0752	0.0816	1270

Note: The "□" of product model BH-MT-PET-CB-□-000 corresponds to the wall thickness specifications with numbers XS, S, M, L, and XL indicating different thicknesses.

{tab=Technical Data}

Property	Unit	Performance
Longitudinal change	%	-50% ~ -30%
Tensile strength	MPa	≥10 (or＞20,000 PSI)
Break elongation	%	≥62%
Dielectric strength	KV/mm	≥15
Dielectric strength rating	V/mil	＞4,000 (60Hz)
Dielectric constant	ε	3.3
volume resistivity	Ω·cm	≥10¹⁸
Melting point	°C	235°C

{/tabs}

Medical grade PET heat shrink tubing- Flat Type BH-MT-PET

info@flypower-heatshrink.com (Super User) — Tue, 19 Jul 2022 10:34:48 +0800

Medical grade PET heat shrink tubing BH-MT-PET

{tab=Specification}

Nominal Size ID (mm)	Lay flat (mm)	W.T. (mm)	Horizontal shrinkage ratio(%)	Vertical Shrinkage ratio(%)
3.0	5.6±0.2	0.08±0.015	48±4	8±3
4.0	7.1±0.2	0.08±0.015	48±4	8±3
5.0	9.0±0.2	0.08±0.015	48±4	8±3
6.0	10.6±0.2	0.08±0.015	48±4	8±3
8.0	13.9±0.2	0.10±0.02	48±4	8±3
10.0	16.9±0.3	0.10±0.02	48±4	8±3
12.0	20.2±0.3	0.10±0.02	45±4	8±3
12.5	21.1±0.3	0.10±0.02	45±4	8±3
13.0	21.7±0.3	0.10±0.02	45±4	8±3
14.5	24.1±0.3	0.10±0.02	45±4	8±3
16.0	26.7±0.3	0.11±0.02	45±4	8±3
18.0	29.8±0.3	0.11±0.02	45±4	8±3
20.0	32.9±0.3	0.11±0.02	45±4	8±3
22.0	36.2±0.3	0.11±0.02	45±4	8±3
25.0	41.1±0.5	0.11±0.02	45±4	8±3
30.0	49.1±0.5	0.11±0.02	45±4	8±3

{tab=Technical Data}

Property	Test Method	Typical Data
Tensile strength	ASTM D2671	≥10 Mpa
Break elongation	ASTM D2671	≥62%
Water absorption	ASTM D570	≤2.0%
Dielectric strength	ASTM D2671	≥15 KV/mm
Volume resistivity	ASTM D2671	≥10¹⁴Ω·cm

{/tabs}

Medical grade LDPE ultra thin wall heat shrink tubing BH-MT-LDPE

info@flypower-heatshrink.com (Super User) — Tue, 24 May 2022 16:17:03 +0800

Medical grade LDPE ultra thin wall heat shrink tubing BH-MT-LDPE

{tab=Specification}

Model	Supplied ID(mm)	Recovered(mm)
Model	Supplied ID(mm)	Inside Diameter	Wall Thickness
BH-MT-LDPE-1.0	1.40±0.20	≤0.45	0.25±0.05
BH-MT-LDPE-2.0	2.40±0.20	≤0.80	0.25±0.05
BH-MT-LDPE-3.0	3.40±0.20	≤1.20	0.25±0.05
BH-MT-LDPE-4.5	4.90±0.20	≤2.00	0.25±0.05
BH-MT-LDPE-6.0	6.50±0.20	≤2.40	0.25±0.05
BH-MT-LDPE-10.0	10.50±0.30	≤4.00	0.35±0.06

Cross Reference
Tyco-Raychem: MT-2000

{tab=Technical Data}

Property	Test Method	Typical Data
Longitudinal change %	ASTM D 2671	-10~+5
Tensile strength/MPa	ASTM D 638	≥10.4
Elongation at break/%	ASTM D 638	≥200
Low temperature flexibility(-30°C, 1h)	ASM-DTL-23053	No cracking
Heat shock(180?C/4 h)	ASTM D2671	No cracking
Dielectric strength/kV/mm	ASTM D 2671	≥15.7
Volume resistivity/Ω·cm	ASTM D 876	≥10¹⁵
Water absorption（%）（23℃、24h）	ASTM D 2671 B	≤0.4

{/tabs}

Medical grade FEP extruded tubing and heat shrink tubing BH-MT-FEP

info@flypower-heatshrink.com (Super User) — Tue, 24 May 2022 11:15:48 +0800

Medical grade FEP extruded tubing and heat shrink tubing BH-MT-FEP

{tab=Specification}

Tab 1. Extruded Tubing

Model	Inside Diameter (mm)	Wall Thickness (mm)	Model	Inside Diameter (mm)	Wall Thickness (mm)
BH-MT-FEP-32	0.25±0.05	0.13±0.05	BH-MT-FEP-16	1.35±0.05	0.41±0.08
BH-MT-FEP-30	0.30±0.05	0.23±0.05	BH-MT-FEP-15	1.50±0.05	0.41±0.08
BH-MT-FEP-28	0.38±0.05	0.23±0.05	BH-MT-FEP-14	1.68±0.05	0.41±0.08
BH-MT-FEP-26	0.46±0.05	0.23±0.05	BH-MT-FEP-13	1.93±0.10	0.41±0.08
BH-MT-FEP-24	0.56±0.05	0.30±0.05	BH-MT-FEP-12	2.16±0.10	0.41±0.08
BH-MT-FEP-23	0.66±0.05	0.30±0.05	BH-MT-FEP-11	2.41±0.10	0.41±0.08
BH-MT-FEP-22	0.71±0.05	0.30±0.05	BH-MT-FEP-10	2.69±0.10	0.41±0.08
BH-MT-FEP-21	0.81±0.05	0.30±0.05	BH-MT-FEP-9	3.00±0.10	0.51±0.10
BH-MT-FEP-20	0.86±0.05	0.41±0.08	BH-MT-FEP-8	3.38±0.10	0.51±0.10
BH-MT-FEP-19	0.97±0.05	0.41±0.08	BH-MT-FEP-7	3.76±0.10	0.51±0.10
BH-MT-FEP-18	1.07±0.05	0.41±0.08	BH-MT-FEP-6	4.22±0.10	0.51±0.10
BH-MT-FEP-17	1.19±0.05	0.41±0.08	BH-MT-FEP-5	4.72±0.10	0.51±0.10

Tab 2. FEP heat shrink tubing

Tab 2. 1.3X and 1.6X shrinkage ratio

Model	As supplied(mm)	Fully recovered(mm)
Model	ID(Min.)	ID(Max.)	W.T.
1.3:1 Shrink Ratio (Thick Type)
BH-MT-FEP-1.3X-H-1.5	1.5	1.24	0.25±0.05
BH-MT-FEP-1.3X-H-2.0	2	1.54	0.25±0.05
BH-MT-FEP-1.3X-H-2.5	2.5	1.93	0.25±0.05
BH-MT-FEP-1.3X-H-2.8	2.8	2.1	0.25±0.05
BH-MT-FEP-1.3X-H-3.0	3	2.3	0.25±0.05
BH-MT-FEP-1.3X-H-3.5	3.5	3.5	0.25±0.05
BH-MT-FEP-1.3X-H-4.0	4	3.08	0.25±0.05
BH-MT-FEP-1.3X-H-4.7	4.7	3.62	0.25±0.05
BH-MT-FEP-1.3X-H-5.0	5	3.85	0.25±0.05
BH-MT-FEP-1.3X-H-5.5	5.5	4.24	0.25±0.05
BH-MT-FEP-1.3X-H-6.0	6	4.62	0.25±0.05
BH-MT-FEP-1.3X-H-6.5	6.5	5.1	0.25±0.05
BH-MT-FEP-1.3X-H-7.0	7	5.4	0.25±0.05
BH-MT-FEP-1.3X-H-8.0	8	6.16	0.25±0.05
BH-MT-FEP-1.3X-H-9.0	9	6.93	0.25±0.05
BH-MT-FEP-1.3X-H-10.0	10	7.7	0.25±0.05
BH-MT-FEP-1.3X-H-11.0	11	8.47	0.25±0.05
1.3:1 Shrink Ratio (Thin Type)
BH-MT-FEP-1.3X-B-1.5	1.5	1.24	0.15±0.08
BH-MT-FEP-1.3X-B-2.0	2	1.54	0.15±0.08
BH-MT-FEP-1.3X-B-2.5	2.5	1.93	0.15±0.08
BH-MT-FEP-1.3X-B-2.8	2.8	2.1	0.15±0.08
BH-MT-FEP-1.3X-B-3.0	3	2.3	0.15±0.08
BH-MT-FEP-1.3X-B-3.5	3.5	3.5	0.15±0.08
BH-MT-FEP-1.3X-B-4.0	4	3.08	0.15±0.08
BH-MT-FEP-1.3X-B-4.7	4.7	3.62	0.15±0.08
BH-MT-FEP-1.3X-B-5.0	5	3.85	0.15±0.08
BH-MT-FEP-1.3X-B-5.5	5.5	4.24	0.15±0.08
BH-MT-FEP-1.3X-B-6.0	6	4.62	0.15±0.08
BH-MT-FEP-1.3X-B-6.5	6.5	5	0.15±0.08
BH-MT-FEP-1.3X-B-7.0	7	5.4	0.15±0.08
BH-MT-FEP-1.3X-B-8.0	8	6.16	0.15±0.08
BH-MT-FEP-1.3X-B-9.0	9	6.93	0.15±0.08
BH-MT-FEP-1.3X-B-10.0	10	7.7	0.15±0.08
BH-MT-FEP-1.3X-B-11.0	11	8.47	0.15±0.08
1.6:1 Shrink Ratio
BH-MT-FEP-1.6X-2.0	2	1.25	0.25±0.05
BH-MT-FEP-1.6X-2.5	2.5	1.57	0.25±0.05
BH-MT-FEP-1.6X-2.8	2.8	1.75	0.25±0.05
BH-MT-FEP-1.6X-3.0	3	1.88	0.25±0.05
BH-MT-FEP-1.6X-3.5	3.5	2.19	0.25±0.05
BH-MT-FEP-1.6X-4.0	4	2.5	0.25±0.05
BH-MT-FEP-1.6X-4.7	4.7	2.94	0.25±0.05
BH-MT-FEP-1.6X-5.0	5	3.13	0.25±0.05
BH-MT-FEP-1.6X-5.5	5.5	3.44	0.25±0.05
BH-MT-FEP-1.6X-6.0	6	3.75	0.25±0.05
BH-MT-FEP-1.6X-6.5	6.5	4.07	0.25±0.05
BH-MT-FEP-1.6X-7.0	7	4.4	0.25±0.05
BH-MT-FEP-1.6X-8.0	8	5	0.25±0.05
BH-MT-FEP-1.6X-9.0	9	5.63	0.25±0.05
BH-MT-FEP-1.6X-10.0	10	6.25	0.25±0.05
BH-MT-FEP-1.6X-11.0	11	6.88	0.25±0.05

 {tab=Technical Data}

Property		Test Method	Typical Data
Longitudinal change/%		ASTM D 2671	±5
Tensile strength/MPa		ASTM D 638	≥13.8
Elongation at break/%		ASTM D 638	≥150
Low temperature flexibility		AMS-DTL-23053 (-65°C, 4h)	No cracks
Dielectric strength/kV/mm		ASTM D 2671	≥19.7
Voltage withstand		ASTM D 149	2500V, 60s No breakdown
Volume resistivity/Ω·cm		ASTM D 876	≥10¹⁵
Water absorption/%		ASTM D 570	≤0.01
Corrosion		AMS-DTL-23053	Non-corrosion
Flammability		ASTM D 2671 C	Non-flammable
Clarity stability		AMS-DTL-23053	Pass
Heat resistance	Tensile strength/MPa	ASTM D 638	≥13.8
	Elongation at	ASTM D 638	≥200

{/tabs}

Medical grade PTFE extruded tubing and heat shrink tubing BH-MT-PTFE

info@flypower-heatshrink.com (Super User) — Tue, 24 May 2022 20:25:47 +0800

Medical grade PTFE extruded tubing and heat shrink tubing BH-MT-PTFE

{tab=Specification}

Tab 1. Extruded Tubing

AWG#	ID(mm)	OD(mm)	OD(mm)	OD(mm)	Package
AWG#	ID(mm)	(S)	(T)	(L)	M/Roll	M/PC
30	0.30±0.10	0.80±0.10	0.70±0.10	0.60±0.10	305	—
28	0.38±0.10	0.88±0.10	0.78±0.10	0.68±0.10	305	—
26	0.46±0.10	0.96±0.10	0.86±0.10	0.76±0.10	305	—
24	0.56±0.10	1.16±0.10	1.06±0.10	0.86±0.10	305	—
23	0.66±0.10	1.26±0.10	1.16±0.10	0.96±0.10	305	—
22	0.71±0.10	1.31±0.10	1.21±0.10	1.01±0.10	305	—
21	0.81±0.10	1.41±0.10	1.31±0.10	1.11±0.10	305	—
20	0.86±0.10	1.66±0.10	1.46±0.10	1.16±0.10	305	—
19	0.96±0.20	1.76±0.20	1.56±0.20	1.26±0.20	200	—
18	1.07±0.20	1.87±0.20	1.67±0.20	1.37±0.20	200	—
17	1.19±0.20	1.99±0.20	1.79±0.20	1.49±0.20	200	—
16	1.35±0.20	2.15±0.20	1.95±0.20	1.65±0.20	153	—
15	1.50±0.20	2.30±0.20	2.10±0.20	1.80±0.20	153	—
14	1.68±0.20	2.48±0.20	2.28±0.20	2.08±0.20	100	—
13	1.93±0.20	2.73±0.20	2.53±0.20	2.33±0.20	100	—
12	2.16±0.25	2.96±0.25	2.76±0.25	2.56±0.25	100	—
11	2.41±0.25	3.21±0.25	3.01±0.25	2.81±0.25	150	—
10	2.69±0.25	3.49±0.25	3.29±0.25	3.09±0.25	150	—
9	3.00±0.25	4.00±0.25	3.80±0.25	3.40±0.25	150	—
8	3.38±0.25	4.38±0.25	4.18±0.25	3.78±0.25	100	—
7	3.76±0.25	4.76±0.25	4.56±0.25	4.16±0.25	100	—
6	4.22±0.25	5.22±0.25	5.02±0.25	4.80±0.25	100	—
5	4.72±0.25	5.72±0.25	5.52±0.25	5.32±0.25	50	—
4	5.28±0.30	6.28±0.30	6.08±0.30	5.88±0.25	50	1.0
3	5.94±0.30	6.94±0.30	6.74±0.30	6.54±0.25	—	1.0
2	6.68±0.30	7.68±0.30	7.48±0.30	7.28±0.25	—	1.0
1	7.46±0.30	8.46±0.30	8.26±0.30	8.06±0.25	—	1.0
0	8.38±0.30	9.38±0.30	9.18±0.30	8.98±0.25	—	1.0

Tab 2. Heat shrink PTFE tubing

Mode l#	As supplied (mm)		After fully recovered (mm)		Standard Length (Meter/Spool)
	I.D.	W. T.	I.D.(max)	W.T.
1.7:1 Shrink ratio (Thick Type)
BH-MT-PTFE-1.7X-H-0.5	0.5±0.2	0.15±0.05	0.4	0.25±0.05	200
BH-MT-PTFE-1.7X-H-1.0	1.0±0.2	0.15±0.05	0.6	0.25±0.05	200
BH-MT-PTFE-1.7X-H-1.5	1.5±0.2	0.20±0.05	0.9	0.25±0.05	200
BH-MT-PTFE-1.7X-H-2.0	2.0±0.2	0.20±0.05	1.2	0.30±0.05	200
BH-MT-PTFE-1.7X-H-2.5	2.5±0.3	0.20±0.05	1.5	0.30±0.05	200
BH-MT-PTFE-1.7X-H-3.0	3.0±0.3	0.20±0.05	1.8	0.30±0.05	200
BH-MT-PTFE-1.7X-H-3.5	3.5±0.3	0.20±0.05	2.1	0.30±0.05	200
BH-MT-PTFE-1.7X-H-4.0	4.0±0.3	0.20±0.05	2.4	0.30±0.05	100
BH-MT-PTFE-1.7X-H-4.5	4.5±0.3	0.20±0.05	2.7	0.30±0.05	100
BH-MT-PTFE-1.7X-H-5.0	5.0±0.3	0.20±0.05	3.1	0.30±0.05	100
BH-MT-PTFE-1.7X-H-5.5	5.5+0.5/-0.2	0.20±0.05	3.3	0.30±0.05	100
BH-MT-PTFE-1.7X-H-6.0	6.0+0.5/-0.2	0.25±0.05	3.6	0.38±0.05	100
BH-MT-PTFE-1.7X-H-6.5	6.5+0.5/-0.2	0.25±0.05	3.8	0.38±0.05	100
BH-MT-PTFE-1.7X-H-7.0	7.0+0.5/-0.2	0.25±0.05	4.2	0.38±0.05	100
BH-MT-PTFE-1.7X-H-7.5	7.5+0.5/-0.2	0.25±0.05	4.5	0.38±0.05	100
BH-MT-PTFE-1.7X-H-8.0	8.0+0.8/-0.2	0.25±0.05	4.8	0.38±0.05	100
BH-MT-PTFE-1.7X-H-8.5	8.5+0.8/-0.2	0.25±0.05	5.0	0.38±0.05	100
BH-MT-PTFE-1.7X-H-9.0	9.0+0.8/-0.2	0.25±0.05	5.3	0.38±0.05	100
BH-MT-PTFE-1.7X-H-9.5	9.5+0.8/-0.2	0.25±0.05	5.6	0.38±0.05	100
BH-MT-PTFE-1.7X-H-10.0	10+0.8/-0.2	0.25±0.05	5.9	0.38±0.05	100
1.7:1 Shrink ratio (Thin Type)
BH-MT-PTFE-1.7X-B-0.5	0.5±0.2	0.10±0.05	0.4	0.15±0.05	200
BH-MT-PTFE-T1.7X-B-1.0	1.0±0.2	0.10±0.05	0.6	0.15±0.05	200
BH-MT-PTFE-1.7X-B-1.5	1.5±0.2	0.10±0.05	0.9	0.15±0.05	200
BH-MT-PTFE-1.7X-B-2.0	2.0±0.2	0.10±0.05	1.2	0.15±0.05	200
BH-MT-PTFE-1.7X-B-2.5	2.5±0.3	0.10±0.05	1.5	0.15±0.05	200
BH-MT-PTFE-1.7X-B-3.0	3.0±0.3	0.15±0.05	1.8	0.20±0.05	200
BH-MT-PTFE-1.7X-B-3.5	3.5±0.3	0.15±0.05	2.1	0.20±0.05	200
BH-MT-PTFE-1.7X-B-4.0	4.0±0.3	0.15±0.05	2.4	0.20±0.05	100
BH-MT-PTFE-1.7X-B-4.5	4.5±0.3	0.15±0.05	2.7	0.20±0.05	100
BH-MT-PTFE-1.7X-B-5.0	5.0±0.3	0.15±0.05	3.1	0.20±0.05	100
BH-MT-PTFE-1.7X-B-5.5	5.5+0.5/-0.2	0.15±0.05	3.3	0.20±0.05	100
BH-MT-PTFE-T1.7X-B-6.0	6.0+0.5/-0.2	0.15±0.05	3.6	0.25±0.05	100
BH-MT-PTFE-1.7X-B-6.5	6.5+0.5/-0.2	0.15±0.05	3.8	0.25±0.05	100
BH-MT-PTFE-1.7X-B-7.0	7.0+0.5/-0.2	0.18±0.05	4.2	0.25±0.05	100
BH-MT-PTFE-T1.7X-B-7.5	7.5+0.5/-0.2	0.18±0.05	4.5	0.25±0.05	100
BH-MT-PTFE-1.7X-B-8.0	8.0+0.8/-0.2	0.18±0.05	4.8	0.25±0.05	100
BH-MT-PTFE-1.7X-B-8.5	8.5+0.8/-0.2	0.18±0.05	5.0	0.25±0.05	100
BH-MT-PTFE-1.7X-B-9.0	9.0+0.8/-0.2	0.18±0.05	5.3	0.25±0.05	100
BH-MT-PTFE-1.7X-B-9.5	9.5+0.8/-0.2	0.18±0.05	5.6	0.25±0.05	100
BH-MT-PTFE-1.7X-B-10.0	10+0.8/-0.2	0.20±0.05	5.9	0.25±0.05	100
4:1 Shrink ratio
BH-MT-PTFE-4X-2.5	2.5+0.5/-0.2	0.10±0.05	0.62	0.25±0.05	200
BH-MT-PTFE-4X-3.0	3.0+0.5/-0.2	0.10±0.05	0.75	0.25±0.05	200
BH-MT-PTFE-4X-3.5	3.5+0.5/-0.2	0.10±0.05	0.87	0.30±0.05	200
BH-MT-PTFE-4X-4.0	4.0+0.5/-0.2	0.10±0.05	1.00	0.30±0.05	100
BH-MT-PTFE-4X-4.5	4.5+0.5/-0.2	0.10±0.05	1.12	0.30±0.05	100
BH-MT-PTFE-4X-5.0	5.0+0.8/-0.2	0.10±0.05	1.25	0.30±0.05	100
BH-MT-PTFE-4X-6.0	6.0+0.8/-0.2	0.10±0.05	1.50	0.30±0.05	100
BH-MT-PTFE-4X-7.0	7.0+0.8/-0.2	0.10±0.05	1.75	0.30±0.05	100
BH-MT-PTFE-4X-8.0	8.0+1.0/-0.2	0.10±0.05	2.00	0.30±0.05	100
BH-MT-PTFE-4X-9.0	9.0+1.0/-0.2	0.10±0.05	2.25	0.30±0.05	100
BH-MT-PTFE-4X-10.0	10+1.0/-0.5	0.10±0.05	2.50	0.30±0.05	100
BH-MT-PTFE-4X-11.0	11+1.0/-0.5	0.10±0.05	2.75	0.30±0.05	100
BH-MT-PTFE-4X-12.0	12+1.0/-0.5	0.10±0.05	3.00	0.30±0.05	100
Customized dimensions are available on request for your special application.

{tab=Technical Data}

Property	Specification Requirement	Test Method	Typical Value
Tensile strength	≥17.3MPa	ASTM D2671	≥22MPa
Elongation at break	≥200%	ASTM D2671	≥300%
Heat shock	No cracking	ASTM D2671 (400?C/4 hrs)	No cracking
Low temperature flexibility	No cracking	ASTM D2671 (-65?C/4 hrs)	No cracking
Volume resistivity	≥10¹⁵Ω? cm	ASTM D2671	≥10¹⁵Ω? cm
Dielectric strength	≥34kV/mm	ASTM D2671	34 kV/mm
Copper corrosion	No corrosion	ASTM D2671	No corrosion
No heavy metals contained
Compatibility with gamma rays and ETO sterilization

{/tabs}

Medical grade 150℃ flexible PVDF heat shrink tubing BH-MT-PVDF-150K

info@flypower-heatshrink.com (Super User) — Tue, 24 May 2022 20:43:26 +0800

Medical grade 150℃ flexible PVDF heat shrink tubing BH-MT-PVDF-150K

{tab=Specification}

Size	As supplied (mm)	After recovered (mm)		Standard length
Size	ID(Min.)	ID(Max.)	Wall thickness(mm）	M/Roll	M/Pc
1.2	≥1.2	≤0.6	0.25±0.10	200	1.22
1.6	≥1.6	≤0.8	0.25±0.10	200	1.22
2.4	≥2.4	≤1.2	0.25±0.10	200	1.22
3.2	≥3.2	≤1.6	0.25±0.10	200	1.22
4.8	≥4.8	≤2.4	0.25±0.10	200	1.22
6.4	≥6.4	≤3.2	0.30±0.10	100	1.22
9.5	≥9.5	≤4.8	0.30±0.10	100	1.22
12.7	≥12.7	≤6.4	0.30±0.10	100	1.22
19.1	≥19	≤9.5	0.43±0.12	100	1.22
25.4	≥25	≤12.7	0.48±0.12	50	1.22
38.1	≥38	≤19	0.51±0.12	50	1.22
50.8	≥51	≤25.4	0.58±0.15	50	1.22

Cross Reference
Tyco-Raychem: MT-3000

{tab=Technical Data}

Property	Test Method	Typical Data
Longitudinal change	ASTM D2671	-10%~10%
Tensile strength	ASTM D2671	≥24.1Mpa
Volume resistivity	ASTM D2671	≥10¹¹Ω.cm
Dielectric voltage withstand	ASTM D2671	AC2500V/60S
Dielectric voltage withstand	ASTM D2671	No breakdown
Elongation at break	ASTM D2671	≥200%
Heat shock	ASTM D2671	No cracking
Heat shock	(275?C/4 hrs)	No cracking
Low temperature flexibility	ASTM D2671	No cracking
Low temperature flexibility	(-55?C/4 hrs)	No cracking
Elongation at break after aging	ASTM D2671	≥100%
Elongation at break after aging	(225?C/168 hrs)	≥100%
Flammability	ASTM D2671	VW-1

{/tabs}

Medical grade 175℃ Semi-rigid PVDF heat shrink tubing BH-MT-PVDF-175K

info@flypower-heatshrink.com (Super User) — Tue, 24 May 2022 20:52:24 +0800

Medical grade 175℃ Semi-rigid PVDF heat shrink tubing BH-MT-PVDF-175K

{tab=Specification}

Size	As supplied (mm)	After recovered (mm)		Standard length
Size	ID(Min.)	ID(Max.)	Wall thickness(mm）	M/Roll	M/Pc
1.2	≥1.2	≤0.6	0.25±0.10	200	1.22
1.6	≥1.6	≤0.8	0.25±0.10	200	1.22
2.4	≥2.4	≤1.2	0.25±0.10	200	1.22
3.2	≥3.2	≤1.6	0.25±0.10	200	1.22
4.8	≥4.8	≤2.4	0.25±0.10	200	1.22
6.4	≥6.4	≤3.2	0.30±0.10	100	1.22
9.5	≥9.5	≤4.8	0.30±0.10	100	1.22
12.7	≥12.7	≤6.4	0.30±0.10	100	1.22
19.1	≥19	≤9.5	0.43±0.12	100	1.22
25.4	≥25	≤12.7	0.48±0.12	50	1.22
38.1	≥38	≤19	0.51±0.12	50	1.22
50.8	≥51	≤25.4	0.58±0.15	50	1.22

Cross Reference
Tyco-Raychem: MT-1000

{tab=Technical Data}

Property	Test Method	Typical Data
Longitudinal change	ASTM D2671	-10%~10%
Tensile strength	ASTM D2671	≥34.5Mpa
Volume resistivity	ASTM D2671	≥10¹³Ω.cm
Dielectric voltage withstand	ASTM D2671	AC2500V/60S
Dielectric voltage withstand	ASTM D2671	No breakdown
Elongation at break	ASTM D2671	≥200%
Heat shock	ASTM D2671	No cracking
Heat shock	(275?C/4 hrs)	No cracking
Low temperature flexibility	ASTM D2671	No cracking
Low temperature flexibility	(-55?C/4 hrs)	No cracking
Elongation at break after aging	ASTM D2671	≥100%
Elongation at break after aging	(225?C/168 hrs)	≥100%
Flammability	ASTM D2671	VW-1

{/tabs}